There are various options for getting print onto the polycarbonate sheet, Ask for specifications if required.

The exact area is depending on the counter or table you choose, select the item in the top menu for information.

The printing of our polycarbonate sheets for Lumaline products takes place on a flatbed printer in CMYK, plus white as an extra colour.

Print the graphics first – laterally reversed – so the print is protected behind the sheet when it is in use.

Print the white colour on top of the CMYK colour so the graphics are enclosed
by the clear polycarbonate and the white colour.

This results in a fantastic effect when a light source shines from behind the polycarbonate sheet, an effect that is one of the milestones in the development of the Lumaline range.

For printing on polycarbonate, the following method must be used:

European market: All materials (images and graphics) are to be submitted in CMYK with Fogra’s ISO-coated 27L colour profile (ISO Coated.icc).

American market: All materials (images and graphics) are to be submitted in CMYK with U.S. Sheetfed Coated v2 colour profile (USSheetfedCoated.icc).

Simulation profile: It is possible to simulate the final product on calibrated/profiled equipment using profiles.

These profiles and instructions of use, is listed above.